Product Reference Guide
25
Chapter 3
Configuration Using Barcodes
This and following sections provide programming barcodes to configure
your reader by changing the default settings.
You must first enable your scanner to read barcodes in order to use
this section. If you have not done this, go to
and complete the appropriate procedure.
Configuration Parameters
Once the reader is set up, you can change the default parameters to meet
your application needs. Refer to
initial configuration in order to set the default values and select the interface
for your application.
The following configuration parameters are divided into logical groups,
making it easy to find the desired function based on its reference group.
Interface Configuration
•
•
•
Parameters common to all interface applications:
•
on page 51 gives options to control the messages sent to
the Host system by selecting parameters to control the message strings
sent to the handheld.
•
on page 65 control various operating modes and
indicators status functioning such as programming for scanning,
beeper and LED indicators and other universal settings.
•
on page 198 provide the ability to configure motion
settings for the handheld.
Wireless-Only Features
•
Wireless Features, starting on page 200
•
Bluetooth Features, starting on page 217
Symbology-specific parameters
•
on page 83 provides configuration of a personalized
mix of 1D codes, code families and their options.
•
on page 166 provides configuration of a personal-
ized mix of 2D codes, code families and their options.
