Wasp Wasp WDI7500 Product Reference Manual Download Page 17

Page: 17 / 310

Product Reference Guide

Chapter 2

Setup

Unpacking

Check carefully to ensure the reader and any accessories ordered are pres-

ent and undamaged. If any damage occurred during shipment, contact Wasp

Technical Support. Information is shown on

page 3

KEEP THE PACKAGING. Should the unit ever require service, it should be

returned in its original shipping container.

Setting Up the Reader

Follow the steps below to connect and get your reader up and communicat-

ing with its host.

1. Begin by Installing the Interface Cable (Corded) or Connecting the Base

Station (Bluetooth and STAR)

2. Configure Interface Settings (see

page 18

3. Configure the Reader starting on

page 21

(optional, depends on set-

tings needed)

Connect the Wasp scanner by plugging directly into the host device as

shown. The power can also be supplied through an external power supply

via the Interface Cable supplied with a power jack.

Summary of Contents for Wasp WDI7500























































































































































































































































































































Search results

Summary of Contents for Wasp WDI7500

Reviews:

Related manuals for Wasp WDI7500

Brands by name

Popular brands

Wasp Wasp WDI7500, Product Reference Manual

Search results

Summary of Contents for Wasp WDI7500

Reviews:

Related manuals for Wasp WDI7500

Brands by name

Popular brands