10
The 'CCD Scanning Control' configuration allows the user to customize how the
t rigger is to opera t e, the length of time in which the LEDs (i.e. the CCD
photodetectors) are on, and activates auto scanning. The Wasp CCD has two (2)
options to control this configura t i o n . Only one option can be enabled at a time.
Note: When the LEDs are visible, the CCD scanner can read the bar code
symbologies that are enabled. See 'Enable Bar Code Symbologies' for further
information.
CCD Setup & Configuration
—CCD Scanning Control Configuration
*Default
End
Begin
On/Off Trigger—
7 Second Delay*
On/Off Trigger with 7 Second Delay
When this option is selected, the LEDs become
visible when the trigger is pressed, and will
remain on for 7 seconds. The LEDs will turn off
automatically after 7 seconds whether a bar
code is successfully scanned or not or if the
trigger is pressed again.
Continuous Scan
Continuous Scan
When this option is enabled, the LEDs are
always visible and the CCD reader will operate
continuously without the need of using the
trigger. This mode will read identical bar code
values back-to-back.
