fig 7.3.1 a
fig 7.3.1 b
INTRODUCTION
© WASP S.r.l.
56
Ordinary and extraordinary maintanance
7.3. Extraordinary maintenance
ATTENTION:
Extraordinary maintenance operations must be carried out by the Manufacturer’s Technicians or
by maintenance personnel who have been instructed and authorized by the Manufacturer.
Any of these operations not carried out by a manufacturer’s technician can cause irreversible
damage to the machine or its parts and therefore renders the warranty null and void.
Extraordinary maintenance interventions are those that are carried out:
• On the occasion of exceptional events, such as revisions;
• Stopping due to breakage of mechanical or fluid parts;
For additional information, support and FAQs on our website: www.3dwasp.com/support
7.3.1. Replacing Flex X Extruder
1. With machine turned on use “Autohome” command from menù PRINT>AUTOHOME
2. Perform the unloading of the filament as described in paragraph 6.5 “Loading/unloading the filament”
3. Turn off the machine
4. Unplug gently the extruder cable, marked with a red band (fig 7.3.1 a)
5. Unplug gently the extruder cable, marked with a red band (fig 7.3.1 b)
6. Remove the last module of the cable carrier by helping it with a flat screwdriver (fig 7.3.1 c)
7. Unscrew one by one all the screws fixing the extruder on the arms with a 3 mm allen key (fig 7.3.1 d)
8. Remove gently one by one all the arms from the extruder (fig 7.3.1 e)
9. Remove the extruder from the machine.
Repeat the operations in the inverse order to assemble the new extruder.
After an extruder replacement is recommended to perform the Autocalibration (see paragraph 8.2 Autocalibration).
Summary of Contents for 4070 FX
