Safety Instructions
2
m2
High performance passthrough Dishwasher - Operator Manual
WARNING
Before installation and commissioning, you must read the safety instructions
and warnings carefully and all the warning labels attached to the equipment.
IMPORTANT
Failure to comply (even partially) with the instructions given in this manual
will invalidate the product warranty and relieves the manufacturer of any
responsibility.
IMPORTANT
the alteration of machine operation, design or the replacement of parts not
approved by the manufacturer may void warranties and approvals.
We have checked that the contents of this document correspond to the model described. there may be
discrepancies nevertheless, and no guarantee can be given that they are completely identical. the information
contained in this document is reviewed regularly and any necessary changes will be included in the next edition. We
welcome suggestions for improvement.
Document subject to change without prior notice.
Information supplied in this manual is copyright. no part of this work may be reproduced or copied in any form or
by any means, electronic or mechanical without the express permission of the author / publisher.
!
!
!
Distributed in australia by Moffat pty limited. 740 Springvale road, Mulgrave VIC 3170.
• tel (03) 9518 3888 • Fax (03) 9518 3818 • Web www.moffat.com.au
Service 1800 622 216
Parts 1800 337 963
WARNING
Equipment contains dangerous voltages and can be hazardous if installed or operated
incorrectly. Non-compliance with warnings or failure to follow the instructions
contained in this manual can result in loss of life, severe personal injury or serious
damage to property.
Installation
•
Use qualified, skilled personnel
•
Follow installation instructions
•
Connect to correct voltage and supply current
•
Provide fully accessible electrical Isolation Switch & water supply valves
Training and Supervision
•
Read and understand the Operating instructions and train all staff
•
This appliance must not be operated by children or infirm persons
•
Machine panels must only be removed by suitably qualified and trained personnel
– internal hazards include live electrics and very hot surfaces
•
This appliance is not intended for use as a stepladder
Hot Surfaces
•
Some surfaces may be hot or very hot
Chemicals
•
Commercial dishwashing detergents are hazardous – handle with care
•
Read and follow the safety information found on the labels of detergent
containers and Material Safety Data Sheets
•
Use protective eyewear and clothing if decanting containers
Hot Water
•
Do not put hands in wash water which may be over 60°C and contain hazardous
caustic detergent
•
Rinse water can be over 90°C
•
Door safety switches are designed for emergency use only
Cleaning
•
Do not hose down the machine or splash water over the exterior
•
Watch for broken glass etc when cleaning the inside of the machine
Service/repair
•
Under no circumstances the user should attempt to carry out repairs
•
All service/repair work must be carried out by qualified personnel only
Power Cord Replacement
•
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similar qualified person in order to avoid a hazard
3 GM - Operator Manual 141218
