Wascomat Encore WHLFP715M, Operating Manual

Page: 21 / 33

)DXOW&RGHV
4.1
)DXOW&RGHV
If power to the machine is accidentally cut, the
machine will restart automatically when power is
restored. The machine will resume the program it
was running at the point the power was cut.
Faults/errors in the program or machine are
indicated by a numerical error code on the panel
display.
Some error codes are cleared automatically when
the Start button is pressed to restart the machine
and some when the door is opened.
For the other error codes, a service technician must be called.
)LJ
1
1
(UURU&RGH &DXVH$FWLRQ
Er1A Door fails to lock on wash program start.
Er1b Doorlock error during wash program.
Er1C Door fails to unlock at the end of wash program.
Er1d Door switch opened during wash program. Make sure machine was not
overloaded.
Er1E INTERLOCK circuit failure (inverter).
Err2 Drain error. Water is not emptied in 10 minutes. Check pump strainer for
clog.
Err5 Water level not reached within 8 minutes. Check water inlet screens for
debris or clog.
Er7A Motor overheat.
Er7b No Tachometer signal. Motor harness disconnected.
Err8 Water Level above parameter set for safety during a wash program.
Pump activates automatically.
Er10 Water level sensor error.
EuAr Communication error between display and power modules.
Unb Load cannot be balanced during extraction. Open door and manually
rebalance clothes and press Start within two minutes.