Shutdown Instructions
If the dryer is to be shutdown (taken out of service) for a period of time, the following must be
performed:
• Disconnect power to the dryer either at the external disconnect switch or the circuit breaker.
Gas Models
• Turn off external gas supply shutoff valve.
5:1
Coin Meter Installation and Blocking Plate
Install the Coin Meter (Coin Operated Models)
1. Unlock control panel with the provided key.
2. Loosen four screws in the control panel.
3. Demount the control panel seat.
4. Install the coin meter faceplate into the control panel and then assemble the coin meter(s) into
the faceplate.
5. Plug the coin meter(s) into COIN 1 (Red) and COIN 2 (Red) harnesses inside the dryer.
6. Carefully reattach the coin meter harnesses using the cable ties mounted on the chassis behind
the coin meter(s). Make sure the harnesses do not obstruct coins dropping into the coin vault
and that they do not touch moving parts on the sides of the coin meter(s).
7. Reinstall the control panel seat by using the four screws, then and locking main control panel.
Install the Blocking Plate (Non Metered Models)
1. Push the blocking plate into the coin vault until the tabs lock in place.
4:1
