JOVYATLAS POWERMASTER S 6000-P BAX 4469 E
- 17 -
BYPASS
ON-LINE
ON-BAT
FAULT
MENU/ENTER
UP KEY
DOWN KEY
ESC
>>UPS COMMAND
SET UPS METERS EXIT
8
Operation- and Displaypanel
1. 2.
3.
Figure 12: Display
8.1
Panel
Operation of the UPS is indicated on the panel with four LED indicators and an LCD. This display is also capable of
alerting the user with audible alarms.
1 LCD of Powermaster S
Status, measurements and alarms of the UPS are all indicated on the LCD.
2 LED of Powermaster S
“BYPASS“
-
Lighted
This LED will light up in
yellow
when the UPS is operating on bypass mode.
-
Flashing
This LED will flash in
yellow
when input voltage (magnitude or frequency) is out of tolerance.
“ON-LINE“ This LED will light up in
green
when the UPS is operating on line mode.
“ON-BAT“ This LED will light up in
red
when the UPS is operating on battery mode.
“FAULT“
This LED will light up in
red
and give off an audible alarm when any internal error occurs in
the UPS. Press any one of the four buttons on the front panel to turn off the audible alarm.
3 Buttons of Powermaster S
1. “MENU/ENTER” button:
Push “MENU/ENTER” button to enter the sub-menu or to set the function that you want.
2. “UP KEY” button: Use “UP KEY” button to scroll up the various menus.
3. “DOWN KEY” button: Use “DOWN KEY” button to scroll down the various menus.
4. “ESC” button: Use “ESC” button to return to the superior-menu or to cancel the function.