7
ALWAYS be sure that power and controller cables do not interfere with the
winching operation or tangle the winch operator. ALWAYS keep safety at top
priority.
Apply several layers of electrical tape where wiring may come into contact with
sharp metal parts of the vehicle to prevent insulation abrasion or cutting.
WARNING
–
Automotive batteries contain gasses which are flammable and
explosive. Wear eye protection during installation and remove all metal jewelry.
Do not lean over battery while making connections.
WINCH WORKING DEMONSTRATION
1. Disengage the clutch by turning the clutch to the
“CLUTCH OUT” position.
2. Using the hand saver tool Grab the cable assembly and pull the cable to the desired
length, then attach to item being pulled.
Caution:
Always leave at least five turns of cable on the drum;
Reengage the clutch by turn the clutch handle to the
“CLUTCH IN” position, as
you need
.
3. Insert the switch assembly connector onto the control box.
4. Test-run winch in two directions, each direction for one or two seconds.
5. While standing aside of the tow path, hold and operate the switch assembly supplied
by your choice. To reverse directions. Wait until the motor stops before reversing
directions.
Summary of Contents for Trojan 40PUS12
Page 12: ...10 WINCH ASSEMBLY DRAWING...
