Page 2
For technical questions, please call 1-888-866-5797.
Item 56478
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
S
E
tup
table of contents
Safety ......................................................... 2
Specifications ............................................. 4
Setup .......................................................... 4
Operation .................................................... 8
Maintenance .............................................. 10
Parts List and Diagram ............................. 11
Warranty .................................................... 12
WarninG SyMBOLS anD DEFinitiOnS
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
iMpOrtant SaFEty inFOrMatiOn
read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1.
Do not move Stand with Miter Saw attached.
2.
prior to using this product, read and
understand all instructions and safety
precautions as outlined in the manufacturer’s
manual of the Miter Saw that is to be used.
3.
Make sure the Miter Saw Stand is placed
on a flat, level, hard surface capable of
supporting the weight of Miter Saw Stand,
Miter Saw being used, and the workpiece.
4.
Bolt the Miter Saw securely to the mounting
brackets on the Miter Saw Stand and test
work set-up for stability before use.
5.
Make sure the workpiece is supported at all
times during operation.
Use the two Extension Arms (12) with
longer wood stock if necessary.
6.
unplug the Miter Saw from its electrical supply
source before performing any service or
maintenance on the Miter Saw Stand.
Make sure
to unplug the Miter Saw before leaving the work
area, moving the Miter Saw Stand from one location
to another, cleaning sawdust from the unit, etc.
7.
Engage both Levers beneath the Mounting
Brackets fully before using the Miter Saw.
8.
Wear anSi-approved safety goggles
during assembly and use.
9.
Do not exceed listed weight capacity. Be aware
of dynamic loading!
Sudden load movement may
briefly create excess load causing product failure.
10. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
11. When folding or unfolding the Miter Saw
Stand, be careful not to pinch fingers.