Warrior Winches EH800-CAD, Owner'S Manual

Page: 6 / 42

WINCH MANUAL
HOIST ASSEMBLY AND MOUNTING
6
Never weld a load while lifting the load.
Do not pull the remote cord to move a
load
Never instantly reverse-wind.
Be sure to stop operation immediately
when the wire rope become fully
slackened or you risk the rope
becoming tangled on the drum.
Never wrap the load with the wire rope.
Wire rope with one or more of the
following defects must be removed and
replaced immediately:
Kinks, distortion, corrosion and signs of
excessive wear or broken wires.
Be sure to fix a rope in the center
of swivel hook.
HOIST ASSEMBLY AND MOUNTING
1. Make sure that the mounting structure can withstand the full rated
lift of the hoist.
2. Ensure that the hoist frame will not deform under twice the full rated
load of the hoist.
Spool from underneath drum

WARNING
Always spool the hoist rope onto the drum in the direction specified
by the drum rotation labels on the hoist.
3. Your hoist is designed with a bolt pattern that is standard in
this class of hoist. Proper alignment of the hoist will allow even
distribution of the full rated load and reduce the chance of damaging
hoist or equipment. Poor installation contributes to approx 90%
equipment or hoist damage.