Pre-launch Checklist:
Drain plugs – installed
Boat cover – removed
Equipment – loaded for proper trim
Bow and stern lines – fastened
Fenders – rigged
Tiedowns – removed
Fuel and water tanks – filled
Outboard or stern drive – tilted up
Electrical connection to tow vehicle – unplugged
Trailer wheel bearings – cooled
Ramp conditions, water depth, current – checked (watch
other boats)
Drain plugs – check again to be sure they are installed
Launching:
Station someone to help direct
Back straight down the ramp
Pull bow of boat to pier or float and secure
Lower outboard or stern drive unit
Connect fuel lines (outboard engine)
Start engine and allow to warm up
Depart launch area slowly
Hauling Out:
Prepare before approaching ramp
Secure fuel lines (outboard)
Tilt outboard or stern drive unit up
Back trailer down ramp
Guide boat onto trailer; use bow lines to help
Hook winch cable to boat’s bow eye
8-4
