3) Put the ON-OFF Switch on front panel of the equipment in ON position this will
a) Start the cooling FAN
b) Energies the main transformer
c) Puts on the MAINS indicator.
4) Set the current regulator to the required output current.
5) Connect the JOB EARTH cable firmly to the job.
6) Hold the required electrode in the holder.
7) Strike an arc by scratching the electrode to the job.
MAINTENANCE.
1) Switch OFF the mains supply.
2) Open the top cover
3) Clean the equipment by removing dust by a blower.
4) Lubricate the fan bearings in regular intervals.
CAUTION:
SWITCH OFF THE SUPPLY BEFORE OPENING THE EQUIPMENT.
SAFETY PRECAUTION:
1) Welding light is dangerous to the eyes as it has ultraviolet rays. Always use
welding screen with proper glass while welding.
2) Wear leather gloves, Apron and leather shoes while welding.
3) Keep the welding area relatively clean and free from inflammable materials
4) Use fully insulated holder.
5) Do not touch the electrode with the bare skin.
3
