-
４
-
Avoid being electric shocked and burnt
z
Never touch on the hot electrical units.
z
Please instruct the authorized electrician to ground the welder
case by using proper sized copper wire.
z
Please instruct the authorized electrician to connect the welder to
power supply by using proper- sized, well-insulated copper wire.
z
When operating in the damp, space-limited area, must ensure
well-insulated between body and work piece
z
When operating at the high-rising location, must ensure safety by
using safe net.
z
Please power off the welder while no longer using.
Avoid breathing in hazardous welding fume or gas
z
Please use specified ventilation to prevent being gas poisoned
and asphyxiated
z
Especially in the container where oxygen is depleted easily
Avoid being harmed by arc flash, hot spatter and slag
z
Arc rays can injure your eyes and make your eyes feel
uncomfortable.
z
Hot spatter and slag can burn your skin.
z
Please wear proper welding helmet, leather gloves, long- sleeved
suit, cap, apron and boot before welding.
Preventing accidents from fire, explosion, container
break
z
Don’t put flammable material in the working area. Hot spatter
and hot weld can easily start a fire.
z
Cable must be connected the work piece firmly to ensure good
conductivity in case causing fire by resistance heat.
z
Don’t weld in the flammable gas or weld container which
contains flammable material, otherwise it can cause explosion.
z
Don’t weld encapsulated container, otherwise it can break.
z
Ensuring fire extinguisher at hand in case a fire break out.
Summary of Contents for INTIG-PULSE series
Page 17: ......
