7
6) INSTALLATION
The installation must be carried out by a professional.
7). CAUTION
This product is intended for industrial use. In a domestic environment this
product may cause radio interference. It is the user's responsibility to take
adequate precautions.
8).Location
Position the welding power source such that its cooling air inlets and outlets are
not obstructed.
9) Mains power supply
Check that the welding power source is connected to the correct mains power
supply voltage, and that it is protected by the correct fuse size.
A protective earth connection must be made in accordance with regulations.
10) MAINTENANCE
Regular maintenance is important for safe, reliable operation.
Only those persons who have appropriate electrical knowledge (authorized
personnel) may remove the safety plates to connect or carry out service,
maintenance or repair work on welding equipment.
11). CAUTION
All guarantee undertakings from the supplier cease to apply if the customer
attempts any work to rectify any faults in the product during the guarantee
period.
12). Inspection and cleaning
A).Power source
Check regularly that the welding power source is not clogged with dirt.
How often and which cleaning methods apply depend on: the welding process,
arc times, placement, and the surrounding environment. It is normally
sufficient to blow down the power source with dry compressed air (reduced
pressure) once a year.
Clogged or blocked air inlets and outlets otherwise result in overheating.
B).Welding torch
The welding torch's wear parts should be cleaned and replaced at regular
intervals in order to achieve trouble-free welding.
