5
( FRONT PANEL DESCRIPTION ):
Fig 1 :- INTIG 402 PULSE FRONT PANEL.
PARAMETER SETTING FOR INTIG 402 PULSE :-
1) PROCESS SWITCH :- TO SELSCT ONE OF THE THREE
WELDING MODES.
A)
ARC WELDING.
B)
TIG WELDING.
C)
PULSE TIG WELDING.
2) MODE SWITCH :- TO SELECT 2T OR 4T MODE.
A)
2T :
In 2T mode the trigger switch has to be pressed
continuously till the welding process has to be
continued.
B)
4T:
In 4T mode the trigger switch has to be press & then
release to start the welding process. After the welding
is complete, press the torch switch again to stop the
welding procedure.
