MACHINE WORKING PRINCIPLE
Three phase input power go into the welding machine via EMC, and go through the three
phase rectifier bridge work of full bridge rectification, and also pass the filter going into the
inverter, to be lower for the voltage with HF transformer, finally, fast rectification and
filtration by FRD, give the output as welding work.
OUTTER FEATURE
MAINTAIN
please pay more attention for the machine maintain with machine use and machine
working situation.
It is the most important things if the machine could be used with a careful use and cycle
maintain work.
please check the power supply, whether it is ok for connection.
please take care and change the new power cable if the power supply cable of machine is
broken.