8
1.1
Front panel illustration and parts number reference
(1)
“Amp/volt” meter
When meter mode switch indicates to “Amp”, the meter displays preset value while
in open load, and display practical value of welding current while in actual working.
To “Volt”, display
practical value while in welding.
(2) “Protection” indicator lamp
Welding machine will automatically stop working when it is overheat, and the lamp
will be light on.
(3) “Power” indicator lamp
Lamp indicating whether power source is effectively connected to power supply
(4) “Amp/Volt” meter mode switch
(5)”SMAW/TIG” Switch (Only in IN TIG Series).
When it is indicated to “SMAW”, the machine is to work on SMAW;
When it is on “TIG”, the machine is to work on TIG
4-step/ 2-step switch (Only in IN TIG Series).
(6) “Remote/ Panel control” switch ((200 series only equipped with Panel control)
When it is on “Panel control”, you can adjust current of welding, arc force or
down-slope time through the knobs and switches on the panel; when it is on “Remote
control’, you can adjust the above parameters through remote control box in a
extended distance from the welding areas
(8) “Welding current” regulation knob
Used to adjust welding current on panel control mode
(9) “Arc force current/ down-slope time” regulation knob
Used to adjust arc force current under SMAW or stop-arc time under TIG
(10) “Arc-starting current “regulation knob used to adjust arc starting current
.
(11) “Remote control/ TIG” cable socket
It is used to connect with remote control cable to adjust welding current, arc force
current or down-slope time through remote control box when it is on the “Remote
control” mode, used to weld in extended distance.
To weld in normal distance on TIG, it is used to connect TIG torch's control cable
directly.
(12)Welding cable (+) quick plug socket
It is used to connect with stick holder on SMAW mode. Connect to work leads on
TIG mode.
(13)Gas outlet (S series not equipped with it)
Connect to TIG torch gas hose.
(14)Welding cable (-) quick plug socket
It is connected to work lead on SMAW mode and connected to TIG torch welding
cable on TIG mode.
