Warner Shelter Systems Limited
PAGE 6
Step 9A
• Attach one corner of the Tent Top to the frame
by pulling handle B to place loop webbing A
under the corner loop C .
C
B
• Attach as in 9A. If tight, insert a stake
through webbing A and press down
and under until the webbing slips under
the corner loop C .
ATTACHING THE LAST
Step 9B
Step 9
UNFOLDING THE TENT TOP
C
• Place the Tent Top midway along one
side and unfold fabric toward the
corners.
• Ensure that the valences are against
the outside edge of the frame.
• Attach webbing, as shown in
Step 9A
,
to corners 1 and 3.
• Pull upper layer towards the opposite
end. Use toggle rope to avoid stepping
on Tent Top.
• Attach webbings, as shown in
Step 9B
,
to corners 2 and 4.
ERECTING THE TENT
ATTACHING WEBBING TO CORNER LOOP
NOTE: The corners are numbered here
for explanation only.
A
A
..\graphicshome\Marquee\Manuals\MQ2040T\MQ2040T Manual 2007.FH11
