Warner Shelter Systems Limited
PAGE 5
Step 5
Cross Cables
Step 7
Step 8
Step 6
• Install second (top) Cross Cable.
• To install last loop, lift last corner to shorten
the distance and hook the cable in place.
• Lowering the corner causes the corners to
adjust their position and the cables to tighten.
• Repeat steps 5 and 6 for the opposite side of
the tent
•
If walls are to be installed
, attach Cable for
SlideWall 13 to the Corners and tighten
turnbuckle.
Corner Pin
• Install first (bottom) Cross Cable 4
diagonally in square frame.
• Hook the cable end loop over the corner pin.
Turnbuckle
Cable: Slide Wall
Cable: Slide Wall
T-plus
Cross Cable
PROTECTING TENT TOP
PROTECTING TENT TOP
12
Drop
Sheet
..\graphicshome\Marquee\Manuals\MQ2040T\MQ2040T Manual 2007.FH11
TENT TOP INSTALLATION
(NOT INCLUDED)
• Unfold Drop Sheet (not included) over
the Cross Cables to protect the Tent Top and
to keep the Tent Top clean.
