15
CLUTCH HOUSING
REASSEMBLY:
Turn the clutch dial to the free spool
position, insert cam follower button side
up. Dial clutch to engage position.
Grease housing and replace single sun
gear, second stage planetary greasing the
tall sun gear, replace 3
rd
stage planetary,
greasing the drum sun gear.
Place drive shaft circle retaining ring up,
through all gears rotating the shaft forward
and reverse to align all gears, remove shaft
and set aside.
Replace mounting nuts, flat side out.
Place drum support plate on top of 3
rd
stage planetary assembly, place the cable
protector on bottom of drum support plate.
Secure in place with the ¼-20 x ½ screws.
Insert ¼-20 x 5/8 screw to the top hole and
thread tie rod to it, (snug). Same with the
second tie rod.
