©2012 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
89614A1
I N S T A L L A T I O N I N S T R U C T I O N S
RENEGADE 800R
3. Remove the aluminum skid plate. There are two options
when removing the skid plate.
Option 1: Remove the aluminum skid plate and leave it off
after installing the center plow mount.
Option 2: Remove the aluminum skid plate and then make
a cut to remove the front section of the skid plate that
would be in the way of the center plow mount.
The section that would need to be cut is shown in Figure 5.
4. Attach the center plow mount to the frame using the
four M8 carriage bolts (A1) and lock nuts (A2) provided.
The right side of the frame can be seen below with the
manufacturers bolt in the left hole. See Figures 6 and 7.
Figure 4
Figure 5
Figure 6 - Right Side of Frame
