WARN® INDUSTRIES
PAGE 2
80539 Rev A0
CAUTION
Moving Parts Entanglement Hazard
Failure to observe these instructions could lead to minor or moderate injury.
Failure to observe these instructions could lead to minor or moderate injury.
Failure to observe these instructions could lead to minor or moderate injury.
Failure to observe these instructions could lead to minor or moderate injury.
Failure to observe these instructions could lead to minor or moderate injury.
Always
take time to fully read and understand the installation and Operations Guide included with this product.
Never
operate this product if you are under 16 years of age.
Never
operate this product when under the influence of drugs, alcohol or medications.
Read installation and operating instructions thoroughly.
Notice
Equipment Damage
Always
refer to the Installation and Specification Guide, supplied in the winch kit, for all wiring schematics and specific
details on how to wire this WARN product to your vehicle.
Never
overtighten the j-bolt to the bracket. Doing so will pinch the winch cable against the bracket, damaging the cable.
Always
put the end of the actuator cable through the slot in the Termination Bracket. Terminating the cable through any
other hole in the bracket will cause the bracket to not function properly and will drastically reduce the life of the actuator
cable.
Read installation and operating instructions thoroughly.
Before You Begin
Table of Contents
I.
Parts List ....................................................... 3
II. Installation ..................................................... 4
III.
Maintenance/Care ......................................... 7
Please read and understand these instructions completely before installation to avoid injury to yourself or
damage to the vehicle or accessory.
Dealer: These instructions contain important information for future reference and must be given to the customer
at time of purchase or upon completion of installation.
TORQUE SPECIFICATIONS
M6, 1/4
8 lb. ft. (10.8 N-m)
M8, 5/16
17 lb. ft. (12.5 N-m)
M10, 3/8
30 lb. ft. (40.7 N-m)
M11, 7/16
50 lb. ft. (67.8 N-m)
M12, 1/2
75 lb. ft. (101.7 N-m)
