WARN INDUSTRIES
PAGE 3
70736A3
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Figure 1
Figure 2
V. INSTALLATION
1.
Install the plow mount using the fastener configura
tions as shown in Figure 1.
A. 3/8” Bolt, 3/8 Nylock Nut
B. J-Bolt, 1/4” Nut
C. 5/16” x 2.0” U-bolt, 5/16” Nylock Nut
2.
To install the plow mount to the underside of the
vehicle, remove the factory skid plate. This will
require the use of a 10mm socket, as shown in Figure
2.
3.
Once the skid plate is removed. Use the plow mount
as a template for holes to be drilled, as shown in figure
3.
Figure 3
Ax1
Bx2
Cx4
Skid Plate
Remove 6 Bolts
IV. FASTENER TORQUE SPECIFICATIONS
1/4 & M6
8 lb. ft. (10.8 N-m)
3/8 & M10
30 lb. ft. (40.7 N-m)
7/16
50 lb. ft. (67.8 N-m)
1/2
75 lb. ft. (101.7 N-m)
5/16 U-Bolt
11 lb. ft. (14.9 N-m)
