©2023 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
110784A0
I N S T A L L A T I O N I N S T R U C T I O N S
1. Remove the plastic tow hook covers by gently
pulling on them to release the clips.
2. From the driver side frame rail, disconnect the
bumper electrical harness.
3. If applicable, remove the adaptive cruise control
(ACC) sensor from its mounting bracket.
4. If applicable, disconnect the electrical connector
from the ACC sensor.
5. Using an E6 torx socket remove the three studs
that attach the ACC bracket to the vehicle.
6. Using an 18mm socket wrench, remove the four
bolts that attach the bumper to the tow hook
brackets (each side).
7. Using a 15mm socket wrench, remove the two
bolts that attach the bumper reinforcement
brackets to the frame (each side).
8. Using a body panel pry tool, remove the push
pin attaching the shroud to the grille (each side).
Remove bumper from the vehicle.