©2019 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
8
105968A0
I N S T A L L A T I O N I N S T R U C T I O N S
20. Install winch and fairlead per winch installation
instructions. Tighten all hardware now.
21. Connect sensor wiring harness.
NOTE: If not installing
sensors, plug unused holes with provided hole plugs (B2)
.
Refer to exploded view on page 3.
22. While holding light bracket (A6 and A7) in place (from
under and behind bumper), line up light port (A8 and
A9) through front bumper light port to bracket. Secure
pieces together with ten stainless steel socket head
screws (B7).
NOTE: Light ports are equipped with removable panels for
lights. Lights shown installed sold separately.
23. If not installing sensors and ascent bumper accessories,
plug unused holes with provided hole plugs (B5 and B4).
Refer to exploded view on page 3.
24. The remaining hardware (B1 and B2) are to used to install
license plate to new bumper.
25. Tighten
ALL
hardware now, refer to torque specifications
on page 3.
26. If not installing a Baja Bar, insert plugs (B1) into the holes
in the top of the bumper.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDER-
STAND ALL SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
M A I N T E N A N C E / C A R E
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted
or deformed.
2. Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
A6 and A7
B7
Figure 15
Figure 16
