©2019 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
105968A0
I N S T A L L A T I O N I N S T R U C T I O N S
3. Using an 18mm socket, remove the three nuts retaining
the stock bumper. Repeat for other side.
CAUTION
Always use assistance when moving or lifting heavy parts.
4. Carefully remove bumper and set on a clean and stable
surface.
5. If equipped, remove the active air dam.
a. Unplug the motor and remove the four retaining
nuts with a 12mm socket (see Figure 5 and 6) .
NOTE: The air dam will not be reinstalled with the
new bumper.
Remove nuts
Unplug
Remove nuts
Figure 4
Figure 5
Figure 6
