PAGE 10
75443 Rev. C0
Maintenance & Warranty
MAI NTENANCE
I nspect the wire rope and hooks for signs of wear or damage before and after each operation. Worn and damaged parts
must be replaced. Do not attempt to lengthen the wire rope or repair a damaged rope.
Examples of rope damage are as follows: Kinks, cuts, knots, mashed or frayed portions, and broken strands.
Examples of hook damage are as follows: Cracks, twisted components, excessive opening, seat wear, loose or unclosed
safety gate, and corrosion. Do not attempt to lengthen the wire rope or repair a damaged rope.
Any hook that has twisted components or excessive opening may indicate over-loading of the product. Contact the
WARN I ndustries Customer Service department to inspect all load bearing components for damage.
Keep the rope and hooks free from contaminants. Use a clean towel to remove dirt & debris. Using light oil on the wire
rope and hooks can prevent corrosion from forming. Be sure to keep clear of electrical terminals on battery pack while
cleaning.
Verify that the battery is not cracked or otherwise damaged.
Always
use WARN I ndustries Replacement Parts when the product needs to be serviced. Contact the Warn Customer
Service department to find the proper replacement part numbers (contact information listed in Warranty section).
WARRANTY
see separate sheet packed with product
-or-
I f warranty sheet is lost or misplaced contact:
Warn I ndustries, I nc.
Customer Service Dept.
12900 SE Capps Rd
Clackamas, OR 97015-8903.
United States:
Phone: 503.722.1200 or (800) 543-9276 (US only)
Fax: 503.722-3000
I nternational:
Phone: 503.722.3008
Fax:
503.722.3005
© 2007 Copyright Warn I ndustries, I nc. All rights reserved.
