5
4
WARMUP INC.
USA: [email protected] | Tel.: 1-888-927-6333 | www.warmup.com
CANADA: [email protected] | Tel.: 1-888-592-7687 | www.warmup.ca
TOWEL WARMER INSTALLATION INSTRUCTIONS
Apply junction box if
required by code.
Power cord entry
Align left side to studs
POSITIONING YOUR TOWEL WARMER
MOUNTING YOUR TOWEL WARMER
Do note that all models will have the power cord exiting on the bottom right bracket (when facing the towel warmer
mounted on the wall). Plan accordingly when setting up switches and electrical rough-in.
Select a desired position to mount the towel rail i.e. at least 600mm/2 feet
above the floor and 300mm/1 foot away from all permanent fixtures in the
surrounding area (toilet, vanity, etc).
The left side of your towel warmer most be anchored into a stud. Use a
stud-finder tool to locate the 2x4 behind your drywall and mark it with a
pencil. Hold your towel warmer level at the desired height and line it up
with the stud on the left hand side.
Using a pencil, draw around the end of each tube to mark their positions
on the wall. Make sure your marks are level and square as these will
determine where you will secure the device to the wall.
Screenshot of the Youtube video “Installing a Warmup Towel Warmer - 5 Contractors Tips by Warmup”.
Screw the mounting inserts securely to the wall at the locations marked. Press the towel warmer onto the mounting inserts
gradually, checking that each leg is lined up with the mounting inserts before applying force. Mount the towel warmer with a
single grub screw on each of the 4 brackets.
