Warmup TW001 Installation Instructions Manual Download Page 2

TOWEL WARMER INSTALLATION INSTRUCTIONS

2

WARMUP INC. 

USA: us@warmup.com | Tel.: 1-888-927-6333 | www.warmup.com

CANADA: ca@warmup.com | Tel.: 1-888-592-7687 | www.warmup.ca

APPLICABLE MODELS

INTRODUCTION

FIRST THINGS FIRST

Carefully unpack your towel warmer and ensure all pieces are included for a successful installation. 

Watch our videos online at www.warmup.com or access the online technical information at warmupedia.warmup.com.

Contact Warmup with any questions on the contents of your order. Check the resistance of the heating cable coming from 

the towel warmer with an ohm-meter or Warmup’s Alligator Tester. 

Check the chart below and ensure your reading is within 10% of the approved resistance reading.

Warmup Towel Warmers were designed and built with simplicity in mind. Constructed of high quality 304 stainless steel 

expertly welded in unique designs, Warmup towel warmers are safe and easy to use.

 

While most of our models require hard-wiring to a power source (except plug-in models) they do not require a control. 

Our proprietary heating technology inside the towel warmer will ensure the device reaches 145F degrees in 3 minutes.

If your goal is to get the comfort of a nice warm towel after the bath or shower, then wire it to your light switch. By the 

time you’re done, your towel will be wonderfully warm.

If the plan is to dry the towels faster in an active household or prevent the discomfort of moldy towels in a poorly ventilated 

space, then wire it to a separate switch which you can leave on separately from the lights or fan.

When combining a towel warmer to a Warmup floor heating system you can conveniently connect the device to your 3iE or 4iE

 

controller. Double check the amperage draw of the existing system before combining both on the same controller. If unsure, 

contact a professional installer/electrician, or call us at (888) 927-6333.

Mounting the towel warmer is very simple with the enclosed instructions. Make sure to read this manual for the do’s and 

dont’s and solicit the help of qualified tradesmen when necessary.

We thank you for your purchase. Say hello to a life of pampering and luxury! 

TW080, 081, 082

TW090, 091, 092

TW107, 110

For Models TW001 and TW002, see page 7.

Summary of Contents for TW001

















Reviews: