8
6 Configuration menu
Configuration menu
6.1
Automatic mode
6.2
Manual operation
6.3
Holiday mode
6.4
Operating lock
6.5
Programming a heating profile
6.6
Date and time
6.7
Offset temperature
6.8
Selecting the desired temperature display
6.9
Configuring the floor heating actuator
6.10
Communication test
Programming the thermostat or changing its settings must be done
through the konekt app.
In automatic mode, the temperature is controlled in accordance with your set
heating schedule. Any manual overrides will be activate until the next change
in the heating schedule.
In manual mode, you can adjust the target temperature you would like
thermostat to achieve. The target temperature can be set manually using the
Rotary button
(E)
on the thermostat or through the app. This temperature
remains active until the next manual change.
To switch between automatic and manual operation press and hold the
rotary button
(E)
for 2 seconds.
6.1 Automatic operation
6.2 Manual operation
Holiday mode allows you to maintain a constant temperature for a certain
period, e.g. during your holidays.
6.3 Holiday Mode
Operation of the device can be locked to prevent settings being changed.
Turns the heating on at just the right time to achieve your target temperature
when you scheduled. If required this can be switched off through the app.
6.4 Operating lock
6.5 Optimum start/stop function
As the temperature is measured on the thermostat, the temperature
distribution can vary throughout a room. To adjust this, a temperature offset
of ±3.5°C can be set. If a nominal temperature of e.g. 20 °C is set but the
room only reaches 18°C, an offset of -2.0°C may need to be set.
6.6 Offset Temperature
This will fully open the radiator valves of any eTRVs assigned to the same
room to quickly heat the room. The boost will last for 5 minutes and can be
activated by pressing the menu/boost button
(E)
or through the app.
Through the app you can amend the boost duration from 5 - 30 mins.
6.7 Boost Function
The Boost function works with eTRV’s only. This function will not
work when paired with an underfloor heating system.
