11
9 Restore factory settings
The factory settings of the device can be restored. The device will
automatically reconnect to the system and redownload its settings
unless it is deleted within the konekt App first.
•
Release the system button
and then press and hold the
system button
(D)
again until
the orange flashing changes to
green.
•
Release the system button
(D)
to finish.
4 s
4 s
•
Open the battery compartment.
•
Remove a battery.
•
Re-insert the battery while
pressing and holding the
system button
(D)
until the
device LED
(D)
starts to flash
orange
10 Maintenance and Cleaning
The device does not require any specific maintenance other than
replacing the battery when necessary. To clean, use a soft, clean
and lint-free cloth. To remove more stubborn marks, dampen the
cloth with warm water. Do not use detergents or chemicals on the
devices.
The range of transmission within buildings can differ greatly from
that available in the open air. Besides the transmitting power and
the reception characteristics of the receiver, environmental factors
such as humidity in the vicinity have an important role to play, as do
on-site structural/screening conditions.
11 General information about radio operation
Radio transmission is performed on a non-exclusive RF channel, which
means that there is a possibility of interference occurring. Interference
can also be caused by switching operations, electrical motors or defective
electrical devices.
Warmup hereby declares that the Warmup konekt Wireless
radio equipment is compliant with RED Directive 2014/53/EU
and Radio Equipment Regulations 2017. Please scan the QR
Code for the Declaration of Conformity.
Do not dispose of the device(s) with regular domestic waste!
Electronic equipment must be disposed of at local collection
points for waste electronic equipment in compliance with the
Waste Electrical and Electronic Equipment Directive.
Declaration of Conformity
Instructions for Disposal