Warmtec EGW-1000, User Manual, Page: 25 / 60

2. Screw the other two brackets to the underside of the heater as it has been shown in the
picture below (Fig.3).
3. After attaching the wall brackets as well as the brackets at the bottom of the heater (Fig. 4),
hold the device and place the holes on the back of the device on the wall brackets (Fig. 5)
25
Holes for wall brackets
The brackets mounted at the bottom
(Fig. 5)
(Fig. 4)
Mounted
wall
brackets
Brackets mounted on the wall
(Fig.2)
(Fig.3)