~ 19 ~
Installation and operation manual WP
Mobile
InverterTemp App
Heat pump
Set up your Wifi module from your smartphone.
After downloading the application, check that your phone is connected to the Wifi
network.
Open the application and press "+" to add a network connection. Select your Wifi and
enter your password then press the arrow at the top right.
Then press the activation key of your Wifi module (see photo 2) and press the arrow at
the top right.
1
2
After loading, which can take a few minutes, the module registers on the application.
The green LED on the Wifi module lights up.
Press the module reference to access the control of your heat pump.
