Installation Support • No Nonsense™ Warranty •(800) 875-5285 • www.WarmlyYours.com
7-8
Floor Mount
MADRID INSTALLATION MANUAL
WALL MOUNTED / FLOOR MOUNT
Voltage 110VAC Rated Frequency: 60Hz
Power Rating: 120W
Step 7:
Mount the frame
onto the bushings
(D) that are fixed to
the wall and make
sure the tubes are
flush against the
bushing.
Step 8:
Tighten all the sey
screws (F) with the
allen key (N) DO NOT
OVER TIGHTEN.
Make sure frame is
firmly fixed to wall.
H
F
D
H
L
J
L
M
M
K
K
I
I
J
After installation is complete, connect the electric power and turn on the Power Switch. The
unit will begin to heat. If the unit will not be used for an extended time, simply turn the unit off
using the power switch.
1. Do not hook the unit up to a circuit until completely reading
these instructions.
2. This product is intended only for domestic use. Do not put
the unit into water. Do not use in a sauna, shower cubicle or
steam room. This product is for indoor use only.
3. If the heating wire inside the unit fails or becomes damaged,
turn the unit OFF and contact WarmlyYours. Do NOT attempt to
repair
or remove the power switch or heating wire.
4. If you encounter any difficulties while installing your Towel
Warmer, installation support is available by phone, 24/7 at
(800) 875-5285.
5. If a return is necessary, please use original packaging if
possible.
