INSTALLING THE INFRARED HEATER:
Please inspect the power supply cord to the heater and the surface before installation.
These must not show any signs of damage.
Fasten hexagon bolts loosely on the rear side of the device.
1. Select a position for the mounting brackets according to the illustrations on page 5, depending on the product type.
2. Drill the holes according to the hole clearances specified on page 13 or the drill template enclosed in the shipping box.
3. Screw on the mounting brackets using suitable anchors and screws.
4. Place the LAVA
®
infrared heater on the mounting brackets and tighten the screws.
WALL MOUNTING
ATTENTION
:
Screws and anchors are not included in the scope of delivery and must
correspond to the construction material of the wall.
4
Stud
Stud
Mounting Bracket
Drywall anchors and
screws must be used in
the remaining 2 holes
ATTENTION: Verify minimum distances! Use required mounting holes!