NOTES
IMPORTANT NOTES:
› LAVA
®
infrared heating devices comply with relevant safety
requirements.
› Installation and initial start-up, as well as repairs and servicing,
may be carried out by a licensed specialist or qualified individ-
ual only. All safety regulations must be observed. This person
must verify first whether the electrical in-house system
complies with the relevant standards. The responsibility of
the manufacturer is limited to supply of the device.
› Comply with country-specific safety regulations.
› Comply with local safety precautions.
› The devices are suitable for the installation on walls.
› Protective areas must be observed in accordance with DIN
VDE 0100, part 701, when installing the device in bathrooms.
› Minimum distances must be adhered to.
› In bathrooms, the device must be mounted so that switches
or other regulators cannot be touched by persons in a bath-
tub or shower.
› Due to the low surface temperature at the rear side (up to
104ºF/40ºC) the infrared heater may also be mounted on wooden
panelling.
› The device is not intended for the use in wardrobes and
beneath church benches.
Dimensional drawing: minimum mounting clear-
ances
1.4" (35 mm)
1.4" (35 mm)
1.4"
(35 mm)
1.4"
(35 mm)
INSTALLATION AND MINIMUM DISTANCES:
LAVA
®
infrared heating devices have to be mounted so that
flammable objects cannot catch fire. Be absolutely sure to
comply with minimum clearances, in particular to highly com-
bustible objects such as curtains, upholstered furniture, etc.
Please also make sure that the infrared heater can radiate
freely into the room.
ATTENTION
:
Strain of any kind on the surface,
whether from persons or objects leaning against it
or from other forces, must be avoided!
CLEARANCES
The LAVA
®
infrared heater must be mounted exclusively using
the fixing components included in the package.
Screws and anchors (not included in the scope of delivery) must
correspond to the construction material of the wall (masonry,
concrete, plasterboard, etc.). The surface of the wall must be
even.
SCOPE OF DELIVERY | PACKAGING
STANDARD SCOPE OF DELIVERY FOR WALL MOUNTING:
› LAVA
®
2.0 INFRARED HEATING
- 2 x mounting brackets
- 4 x hexagon bolts M8 x 16
ATTENTION
:
The wall must be even. Otherwise
damage of the surface of the LAVA
®
infrared heat-
ing device may occur.
3