Warmlite WHITBY 2KW Instruction Manual Download Page 4

4

CUSTOMER SUPPORT TEAM: 

+44 (0) 333 220 6056

PRODUCT SAFETY

 

When using 

any

 electrical appliance, basic safety precautions should 

always be followed including the following:

 

•  Check that the voltage of the 

main circuit corresponds with 

the rating of the appliance 

before operating.

•  The intended use for this unit 

is described in this manual. 

The use of any accessory 

or attachment or the 

performance of any operation 

with this appliance other 

than those recommended in 

this instruction manual may 

present a risk of personal 

injury.

•  Retain this manual for future 

reference. 

• 

WARNING!

 When using 

mains-powered appliances, 

basic safety precautions, 

including the following, 

should always be followed to 

reduce the risk of fire, electric 

shock and personal injury 

and material damage.

•  Check that the voltage of the 

main circuit corresponds with 

the rating of the appliance 

before operating. 

•  Always ensure that the 

appliance is placed on a firm 

level surface. Ensure that the 

appliance is not positioned 

close to curtains, furniture or 

any combustible materials

as this could create a fire hazard. 

The appliance must not be 

located immediately below a 

mains socket outlet. 
• 

DO NOT

 immerse cords, 

plugs or any part of the 

appliance in water or any 

other liquid.

• 

DO NOT

 let the cord hang 

over the edge of a table 

or counter or let it come 

into contact with any hot 

surfaces. 

• 

DO NOT

 carry the appliance 

by the power cord. 

• 

DO NOT

 use any extension 

cord with this appliance. 

•  The use of accessory 

attachments is not 

recommended by the 

appliance manufacturer, 

apart from those supplied 

with this product. 

DO NOT

 

use extension cords with the 

appliance.

• 

DO NOT

 pull the plug out by 

the cord as this may damage 

the plug and/or the cable. 

•  Switch off at the wall socket 

then remove the plug from 

the socket when not in use 

or before cleaning. 

Summary of Contents for WHITBY 2KW

















Reviews: