background image

Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification. 

All Dimension are in mm………….Copyright ©  

18 May 2015 

These are guidelines only—each Installation will operate with it’s unique aspects: 

 

Place generous amount of crumpled newspaper in the Firebox. Place 10-15  pieces of finely split, dry kindling on top and 
behind the paper, say 20cms. Putting firelighters under the newspaper can help to sustain burn time.  

FOR CORRECT OPERATION OF YOUR OPEN WOOD FIRE—Follow These Guidelines

 

Light the paper and/or firelighters from both ends and the middle. As 
soon as the kindling has ‘caught’ and is burning briskly, add smallish 
pieces of wood to the fire. When the fire is established, put on larger 
pieces in a criss-cross pattern. 
 

 

 

 

 

 

 

 

     

You may notice a faint smell on the first light of the fire. This is the 
paint coat curing and  this smell will soon disappear. (see note on 
Paint). 
 
The most productive way to control the burn rate is by the amount of 
fuel that you load in the fire. Load the fire to gain the desired heat out-
put but ensure that the fire is not over firing. See fuel load in these  
instructions. 

The Damper Adjustment Arm is always on the top left of the fire opening, as indicated. 
The handle fits inside the Adjustment Arm & has 4x settings from fully open to closed.  

Fully open the Damper when first lighting 
the fire, by using the Damper Handle tool as 
indicated . 

Damper 

Damper 

Note: 

The Damper is fully open when the handle is in the out position, and closed when in the in     

position. When fully closed the smoke should still be able to draw up the Chimney .   

Summary of Contents for SI440









Reviews: