29 March 2021
Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notification.
All Dimension are in mm
18
REMOTE CONTROL FEATURES
OPERATION OF YOUR REMOTE CONTROLED EG GAS BURNER (SIT 845 valve)
OPERATION OF YOUR REMOTE CONTROLED EG GAS BURNER (SIT 845 valve)
Press and release the
button to turn the remote on and off.
With the remote off, press and hold the
‘
T/P
’
button for 2 seconds or longer to initiate programming the
time. The Time, Hour setting and AM/PM will flash.
Setting the hour function:
Press and release the
▲
or
▼
button to increase or decrease the hour setting
by 1 hour. Please ensure that AM/PM is set correctly. Press
‘
OK
’
to accept. The minute digits will begin to
flash.
Setting the minute function:
Press and release, the
▲
or
▼
button to increase or decrease the minute
setting by 1 minute. Press and hold the
▲
or
▼
button for 2 seconds or longer to increase or decrease
the minute setting by 1 minute every 0.5 seconds. Press
‘
OK
’
to accept. The days of the week will begin to
flash.
Setting the day of the week function:
Press and release the
▲
or
▼
button to change the day of the
week to the following or previous day. Press and hold the
▲
or
▼
button for 2 seconds or longer to in-
crease or decrease the day of the week by 1 day every 0.5 seconds. Press
‘
OK
’
to complete setting.
The time and day of the week is now set.
SETTING THE DAY OF THE WEEK AND TIME
USING THE VARIOUS MODES
While the remote is switched on, pressing and releasing the MODE button will cycle between all available
modes. These are:
Manual Mode
→
Auto Mode
→
Flame Mode
→
Manual Mode
Manual mode
Manual mode does not require that the time and day of the week to be set. Press the
▲
or
▼
button to
increase or decrease the temperature as desired.
Automatic mode
The automatic mode allows the temperature to be regulated according to a programmed level and time.
At any time, the temperature may be adjusted up or down. However, whenever the remote changes to a
new time period, the temperature will be set automatically according to that period
’
s setting.
Mode Button
Temperature/
Programming Button
Fan
‘
F
’
Button
NOTE:
Burner
only models do
not have fan
option.
On/off Button
Up
▲
Button
Down
▼
Button
