WarmFlow Air Source A-Series, Manual

Page: 45 / 76

Page 43
Table 13 Thermal Disinfection Parameters
Parameter Name Range Default Description
G01 Setpoint 60~70°C 70°C
Hot water thermal disinfection target
temperature
G02 Time of Duration 0~60min 0min
Duration of thermal disinfection cycle
(0 is off)
G03 Start Time 0~23h 0h Time when thermal disinfection is on
G04 Work cycle 1~30days 7days
Thermal disinfection cycle schedule
(default is once every 7 days)
Table 14 Temperature Parameters
Parameter Name Range Default Description
R01
Hot Water
Setpoint
R06~R07 55°C Hot water target setpoint
R02 Heating Setpoint R08~R09 40°C Heating target setpoint
R03 Cooling Setpoint R08~R09 12°C Cooling target setpoint
R04
Power-on Return
Difference
0.5~10°C 2°C
Hysteresis differential for heating and
cooling setpoint
R05
Standby Temp
Difference
* 2°C
Temperature difference above the hot
water setpoint to return to standby mode
R06
Min Hot Water
Setpoint
* 40°C Minimum hot water setpoint allowed
R07
Max Hot Water
Setpoint
*
65°C Maximum hot water setpoint allowed
R08
Min Heating
Setpoint
* 20°C Minimum heating setpoint allowed
R09
Max Heating
Setpoint
* 50°C Maximum heating setpoint allowed
R10
Min Cooling
Setpoint
* 12°C Minimum cooling setpoint allowed
R11
Max Cooling
Setpoint
* 20°C Maximum cooling setpoint allowed
R12 Electric Heating 0/1/2 00
Electric Heating Function, 0 for not used,
1 for in-line heater, 2 for tank immersion
R13
Electric Heater
Start Difference
* 5°C Hysteresis differential for electric heater
R14
Electric Heater
Start AT
* 2°C
Outside temperature below which the
electric heater is enabled
R15
Delay of Electric
Heater
* 30mins
Delay time for electric heater to start as
outside temperature falls below R14
R16
Electric Heater
Start at Once AT
* -5°C
Outside temperature below which the
electric heater starts without delay