Securing your Electric Blanket
•
Your electric blanket must be placed directly onto the mattress.
Mattress protectors must be fitted over the electric blanket.
•
Place the blanket onto the mattress with the controller connections
at the head end of the bed.
•
Electric blankets must not be used on top of the user (as with
normal blankets), instead they must be firmly secured to the
mattress.
•
Fit the side skirts around the edges of the mattress then use the
elastic skirt to ensure that the blanket fits snugly around the sides
and underneath the mattress.
•
Spread the skirt around the mattress edge ensuring even tension
and making sure the blanket is placed evenly over the mattress
then ensure that the blanket is flat and crease free.
•
Failure to follow these fitting instructions may trigger the overheat
protection system and render the blanket permanently inoperative.
This will invalidate the warranty.
•
The electric blanket should not be tucked in at the sides.
•
Make your bed in the usual manner.
•
After the blanket is secure and fitted correctly, plug the controller
into the wall power socket and turn on.
•
Do not cover the controllers at any time.
•
Keep the controller away from external heat sources.
