Heating Modes
Instant Heat Mode
For more information visit: www.designerheater.com
Heating
Modes
05
09
Your Wärme Designer Heater has two different heating modes:
• Instant Heat Mode
• Programmed Weekly Heating Mode
Instant heating mode provides three additional heating functions:
Press the key and use the UP and DOWN arrows to select the desired mode. The icon of the selected mode will
flash on the LCD display.
Comfort
Comfort function is intended to heat the room at the set
temperature. To activate or deactivate the comfort function, press
the up or down key. When activated icon
appears on the LCD
display. Default heating temperature is set to 25°c.
The mode display icon is
Economy
Economy function is intended to maintain an average room
temperature. When the room temperature drops to 3°C below the
target temperature, the heater will automatically switch back on.
The mode display icon is
Frost-free
Frost-free function is intended to keep the minimum temperature of
5°C inside the room (this temperature cannot be adjusted).
The mode display icon is
1.
To enter Instant heat mode unlock the heater, press the key and use the UP and DOWN arrows until the
key is lit.
2.
Once the key is lit, press the key and then use the UP and DOWN arrows to select the desired heat function
(Comfort, Economy, Frost-free).
3.
You will see the icons on the left hand side change between the heat settings.
4.
Press on the desired heat function setting (Comfort, Economy, Frost-free)
5.
Your heater will now heat to the target temperature you have set.
OK
OK
Summary of Contents for WH-24P
Page 1: ......
