Switching Your Wärme Designer Heater On/Off
For more information visit: www.designerheater.com
Use and
Operation
04
07
1.
Set the red I/O switch on the side of your Wärme Designer Heater to the “I” position.
2.
Press the key to activate the menu.
3.
The LCD display will show the current temperature and the set time (default 12:00).
(Please note: When the I/O Button is switched to the O position, only the time is deleted and all other settings stay the same. Once turned
back on the clock will need to be reset).
Child Lock Function
1.
To set the heater to a standby mode and apply the child lock, press the key and hold for 5 seconds.
2.
To unlock the heater, press the key for 3 seconds.
3.
The heater will automatically lock if no button is pressed for one minute.
Setting The Temperature
1.
To set the temperature press the key.
2.
The temperature will start to flash on the LCD display.
3.
Use the UP and DOWN arrows to select the desired target temperature.
4.
Press the key again to confirm.
Timer Function
1.
In the instant heating mode, the digital clock is a countdown timer, which can be set in hours and minutes to keep
the heater on, for example, whilst you go to sleep for as long as you desire (maybe 1 hour before bed).
2.
In weekly heating mode, the same digital display is a 24 hour clock and can be set as a clock (see setting the time).
c
c
Summary of Contents for WH-24P
Page 1: ......
