2
The wireless receiver must be only be installed by a qualified electrician in compliance with
the circuit diagram enclosed with these instructions to the latest regulations.
To achieve protection class II, adequate installation measures must be taken. The wireless
receiver which can be installed separately, is designed exclusively for temperature control
in dry and closed rooms and normal living environments. This electronic device was built
to standard EN60730-1; it operates per working 1C principle.
When Installing This Product:
1.
Please read these instructions carefully. Failure to follow the instructions can damage
the product or cause a safety hazard.
2.
Check the ratings given in the instructions to make sure the product is suitable for the
application.
3.
The installer must be a qualified electrician.
4.
After completing installation, use these instructions for using the controller and receiver.
Installing the Thermostat:
This thermostat can be mounted on to the baseplate;
Please note that the thermostat can only be battery powered;
Please place the thermostat in a location where it will able to control the room temperature
but away from the direct influence of radiators, sunlight and any other appliances giving off
heat.
A. Take out the thermostat
B. Put the thermostat into the shelf of the back-plate
C. Insert the shelf of the back-plate
Installation
01205 821 796
www.warm4less.com
EASI
INSTRUCTION
MANUAL
2
