6
TO WASH AND RINSE CONTAINER
1. REMOVE CONTAINER FROM MOTOR BASE. Remove lid. Rinse
container interior and lid under running water. Add washing solution
to container. Scrub and flush out the container interior and lid to
dislodge and remove as much food residue as possible. Empty
container.
2. Wipe down exterior of container with a soft cloth or sponge
dampened with washing solution. Wash lid and lid insert in fresh
washing solution. Fill container one-quarter full with fresh washing
solution, cover (with lid only), place on motor base and run on high
speed for one (1) minute. Empty container.
3. Repeat step (2) using clean rinse water in place of washing solution.
IMPORTANT
NOTE: IN ORDER TO MINIMIZE POSSIBILITY OF SCALDING,
TEMPERATURE OF WASHING SOLUTION AND RINSE WATER MUST
NOT EXCEED 115˚F (46˚C), AND QUANTITY USED MUST NOT
EXCEED ONE-QUARTER CONTAINER FULL.
IF HIGHER TEMPERATURES OR LARGER QUANTITIES ARE USED,
OBSERVE ALL PRECAUTIONS GIVEN IN THE OPERATING MANUAL
UNDER “HOT BLENDING INSTRUCTIONS”, page 5.
TO SANITIZE AND DRY CONTAINER
1. Wipe down exterior of container with a soft cloth or sponge
dampened with sanitizing solution.
2. Fill container with sanitizing solution, cover, place on motor
base, and run on high speed for one (1) minute. Empty container.
Dislodge any residual moisture from blade assembly by placing
empty container on motor base and running on high speed for two
(2) seconds.
3. Sanitize lid and lid insert by immersing in sanitizing solution for two
(2) minutes.
4. Do not rinse container, lid, or lid insert after sanitizing is completed.
Allow parts to air-dry.
TO CLEAN AND SANITIZE MOTOR BASE
1. UNPLUG POWER CORD. Wipe down exterior surfaces of motor
base with soft cloths or sponges dampened with washing solution,
rinse water, and sanitizing solution. Prevent liquid from running into
motor base by wringing all excess moisture from cloths or sponges
before using them.
DO NOT IMMERSE MOTOR BASE IN WASHING SOLUTION, RINSE
WATER OR SANITIZING SOLUTION.
2. Allow motor base to air-dry before using.
