7
9.
Wash and dry the container after each use. See Cleaning
and Sanitizing Instructions.
10. Unplug to turn off all power to blender.
TBB160 – Electronic Touchpad Controls with Timer
Follow steps 1–3 from the TBB145
operating instructions.
4.
This blender is equipped with
electronic touchpad controls
with HI, LO, STOP and PULSE
buttons as well as a 60-second
countdown timer. Always use HI
or PULSE for crushing ice.
NOTE:
Blender can operate in two
modes: Timer Mode & Continuous Mode.
5.
For timer mode, press the
up
or down
arrow to set
the desired time on the LED display, up to 60 seconds.
Press and hold the u
p
or down
arrow for fast scrolling.
After the time is set, press either LO or HI to start the
blender. LED will blink during blending. The timer will count
down to 0 in 1-second intervals and then the blender will
stop. Once you set a time, it will be kept and is repeatable
until reset or unplugged.
NOTE:
If you want to increase or decrease the time while the
timer is counting down, press the u
p
or down
arrow symbols
as needed. Time will increase in 1-second intervals. Pressing the
PULSE or STOP button during timer mode will
stop the motor regardless of how much time is left on the timer.
6.
For continuous operation, press either the LO or HI button.
When blending is complete, press STOP. For momentary
operation, press the PULSE button; motor will run on MAX
speed until the button is released.
NOTE:
This blender utilizes a Slow Start
™
feature. When
beginning HI or LO operation, the unit will start in a lower speed
for 1 second and then switch to the full selected speed. PULSE
utilizes a .5-second Slow Start
™
. This allows for a more even
blending of ingredients in container.
7.
Allow motor to come to a complete stop before removing
container from blender base. Never place the container
www.
GlobalTestSupply
.com
Find Quality Products Online at:
