MX MECHANICAL SWITCHES
1. Before starting, make sure that the blender
is unplugged.
2. With the unit in “OFF” position, place container on
blender base. Be sure container is fully seated and
that drive coupling is properly engaged. Plug blender
cord into outlet.
3. Put ingredients into container and cover it. Do not fill
above MAX line.
4. This blender has 2 speed settings: HI and LO . Press Paddle Switch
to desired position. To crush ice quickly, use HI speed setting.
5. When finished blending, set paddle switch to “OFF” position.
6. This blender is equipped with a PULSE option. Hold paddle switch in
“Down” position to engage PULSE function. Unit will run on HI speed
until the paddle switch is released.
7. Allow motor to come to a complete stop before removing container from
blender base. Never place the container on the motor base or remove it
from the motor base while motor is running.
8. Always hold container with one hand when starting and while blending.
Never operate without jar lid.
9. Wash and dry container after each use. See Cleaning and Sanitizing
instructions.
NOTE: If you have an electronic unit, please refer to the following instructions.
MX ELECTRONIC TOUCH PAD SWITCHES
WITHOUT SOUND ENCLOSURE AND INTERLOCK
1. Before starting, make sure that the blender is unplugged.
2. Place container on blender base. Be sure container
is fully seated and that drive coupling is properly
engaged. Plug blender cord into outlet.
3. Put ingredients into container and cover it. Do not fill
above MAX line.
4. This blender is equipped with an electronic
membrane keypad. The keypad has a main power
ON/OFF button, and HI and LO , STOP and PULSE buttons.
5. Press the ON/OFF button to turn on the blender. Green LED will
illuminate. For continuous operation, press either LO or HI button.
When finished blending, press STOP . For momentary operation,
press the PULSE button; motor will run on HI speed until the button
is released.
NOTE:
Your MX Electronic Blender utilizes a Slow Start
™
feature. When
pressing HI , the unit will start in the “Low” speed for 2 seconds and
then switch to HI speed. This allows for a more even blending of
ingredients in container.
3
CUISIMAT
