Commissioning
2009209 [Rev. 4 - en]/2015-12-08
Page 5 | 14
Sa
ving t
he
lo
w
er limit position
Press the UP button/DOWN button.
X
Move to the lower limit position (
Press the control button briefly.
"Klack"
The drive clicks or jerks briefly.
Sa
ving t
he
upper limit position
Press the UP button/DOWN button.
50
Move to the upper limit position.
Press the control button briefly.
The drive waves.
Ending t
he se
tting pr
ocedur
e
Press the mode button briefly with a pointed ob-
ject.
WMS Hand-held trans-
mitter:
WMS Hand-held trans-
mitter basic:
The LED goes out
and the transmission
LED lights up for 2
seconds.
The LED
A
and the
transmission LED
light up for 2 seconds.
Explanation of the colours:
Green = The setting procedure was success-
ful.
Red = The setting procedure failed; repeat
the complete procedure.
Se
tting t
he mo
tor limit positions
The limit positions are set.
The next step is another trial run.
