2004919_i•en•2017-09-01
We reserve the right to make technical changes
19
5.5 Copying the structure
of the WMS network to
the WMS WebControl
The following section describes how to copy channels using the WMS Hand-
held transmitter as an example.
The WMS Hand-held transmitter must be within radio range of the WMS WebCon-
trol.
In the WMS WebControl, go to the "Configuration" menu and select the de-
sired channel (e.g. Roller shutter 1) in the corresponding room (e.g. Kitchen).
Wake up your WMS Hand-held transmitter, for example, by pressing any
product button.
Select the channel of the WMS Hand-held transmitter that you wish to copy
(in this example, press the "Roller shutter" product button).
(For more detailed information, see the operating and installation manual of
your WMS Hand-held transmitter, art. no. 890 374.)
Briefly press the learn button on the WMS Hand-held transmitter.
Adopt the transferred channel in the browser using the "L adopt" button.
The L LED on the WMS Hand-held transmitter lights up green and thus con-
firms that the step was successful.
When the WMS Hand-held transmitter indicates that the transfer was suc-
cessful, the website of the WMS WebControl also indicates that the transfer
was successful with a message in the "Configuration" menu. After this, the
channel type icon is displayed in front of the sun shading product name.
Repeat this step as often as necessary until all channels have been trans-
ferred to the WMS WebControl.
Fig. 14
The structure of the WMS network has been transferred successfully.
Configuration
